Car Code Reader OBD2 Scanner Battery Tester 2 in 1 Automotive Diagnostic Check Engine Fault Light Emission Analyzer Smog Check EVAP Charging Cranking Test Scan Tool

Price: $69.99
(as of Sep 05, 2021 12:50:33 UTC – Details)

Product Description

Beefix OBD2 Scanner Code Reader Battery Tester 2 in 1 Auto Diagnostic

Does my car have OBD2?

Works on most vehicles sold in the USA with model year of 1996 or newer; 2000 EU-Based and 2005 Asian-Based cars or newer. Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN. (If you are not sure what kind of protocol is, you can consult us or your dealer to confirm.)

The waveform can display the voltage changes before, during, and after the vehicle starts, so that you can visually observe the changes in the vehicle voltage under various conditions.

BATTERY TEST FUNCTION

The battery test function can help you monitor the state of the battery, including voltage, CCA, electronic resistance, rated CCA, charging state, healthy state, and show you the test result in one sec. It supports ordinary lead-acid battery, AGM flat plate battery, AGM spiral battery, GEL. Support polarity reverse connection protection, more safer, easy to use. (Do not use in equipment with a voltage higher than 16 volts to avoid damage to the device)

State of Charge

State of Health

Voltage Test

Charging Test

Cranking Test

Ripple Test

Load Test

Resistance Test

Take the car as an example:

Discharge Voltage: When the ignition OFF, the engine OFF (over 20 min) the Discharge Voltage should be 12V, if low than 11V, it will be hard to turn the ignition ON. If the voltage under 11V continuously, it means the battery is aging and replacement is needed.

Starting Voltage: During ignition, the voltage will drop to the starting voltage, around 7.5-9.5V. If the starting voltage continuously stays under 7.5V, it means the battery capacity is low and needs to be replaced.

Charging Voltage: When the ignition ON, the engine ON. The alternator will charge the car battery continuously, normally around 14V.

FULL OBD2 FUNCTION

Read Code

Plug-in and read the code, if there are some problems, you can check the explanation of the code directly from this scanner, you don’t need to search the code on the internet or ask the dealer.

Erase Code

If the fault light came back after being cleared, it means that the error cannot be eliminated by erasing the code, and you need to solve it manually according to the problem.

I/M Readiness

One-button I/M preinspection readiness key along with a green (no-fault codes), yellow (intermittent problems) and red (permanent-problem codes) LED scheme.

Data Stream

Data Stream can monitor the real-time data (while the car is moving or when the ignition is ON)like engine temperature, O2 value, RPM, Speedometer, LAC Value, battery voltage, ignition angle, etc…

Product Parameters

Display/ Size

Color/2.4 inch TFT

Product Size

7.6 × 5.9 × 2.24 inch

Product Weight

18.69oz

Cable/Battery Cable

55.9/31.5 inch

Read&Erase Code

Yes

I/M Readniess

Yes

Data Stream

Yes

Freeze Frame

Yes

O2 Sensor Test

Yes

On-Board Monitoring

Yes

EVAP System

Yes

DTC Lookup

Yes

Battery Test

Yes

Cranking Test

Yes

Charging Test

Yes

ACC/Voltage

100-2000/6-16V

【UNIVERSAL COMPATIBILITY】The OBD2 scanner applies to all vehicles (OBDII and CAN) after 1996 US, 2000 Europe, and Asian cars and Newer, and also applicable to all 6 -16V automobile batteries. It supports 9 languages: English, German, French, Spanish, Italian, Polish, Dutch, Russian, and Portuguese.
【UPGTADE 2 IN 1 SCANNER】The OBD scanner diagnostic tool has two-in-one functions, which can read the engine fault light and clear the error codes and detect the battery health status of cars. Scanner for car supports 10 test modes and all 9 battery standard protocols. The upgraded version, powerful automobile inspection equipment.
【POWERFUL CODE READER】The car code reader covers all OBD 2/EOBD diagnostic functions for the engine system. Read and erase fault code, O2 sensor test, EVAP system test, Onboard monitoring test, View VIN, Data flow, Freeze frame, I/M readiness, EGR system monitoring, Resets monitor. It can assist you in passing the annual emissions test and SMOG CHECK easily.
【RELIABLE BATTERY TESTER】The car battery tester can read the battery voltage, analyze the battery health, check the charging status and faults. It can detect 6-16V ordinary rechargeable batteries, AGM flat batteries and spiral batteries, gel batteries, and support the battery status of supporting equipment such as cars, motorcycles, light trucks, yachts, lawn movers. Positive and negative reverse plug-in protection, 3 seconds to display accurate results.
【LIVE DATA STREAMS】The car code scanner can get Fuel System Status, Calculate LOAD Value, Engine Coolant Temperature, Fuel Trim, Vehicle Speed, Engine Speed, and more than 80 data information. The integrated memory card can store fault codes, play back and view the data outside the vehicle, and print and modify the data stored in printing. Through the built-in DTC query library and display definition, it is easy to find the root of the fault code.
【UNIQUE STYLING DESIGN】 The auto diagnostic scanner has a one-key I/M ready button, high-resolution TFT color display, and built-in speaker, LED indicator light, newly designed keyboard, plug and play, no battery, free storage bag, Simple to use, and easy to store.
【GREAT GIFT】For your father, husband, brother or boyfriend, the best choices are technicians, car dealer, Used car dealer, auto mechanics, auto engineer, diagnostic technician, auto technician, domestic technicians, backyard technicians, retired technicians, DIY beginner and auto student. Beefix OBD2 scanner, a surprise for your lover!
【PROFESSIONAL AFTER-SALES】The code reader car diagnostic tool provides a 1-year warranty, lifetime update, and online upgrade service. If you have any problems, please contact us. The professional team will provide a professional reply and technical support to you within 24 hours.