HerMia 200PCS AWG 22-18 Red Solder Seal Wire Connectors, Waterproof Insulated Heat Shrink Butt Connectors, Solder Electrical Terminals for Marine Automotive Boat Truck Wire Joint

Price: $17.99
(as of Sep 13, 2021 00:15:20 UTC – Details)

HerMia 200pcs Red Solder Seal Heat Shrink Wire Connectors

Package contains:
200pcs Red Connectors, Cable cross-section 0.5-1.0 mm² (AWG 22-18)

Features:
Waterproof – Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot melt adhesive & solder inside, sealed with advanced waterproof function.
Easy to use – Just strip your wires, insert them into the connector and apply heat. Transparent sleeve provides precise inspection, easy control soldering process.
No Slip Wire Contact – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, avoids wires slipping out from the terminal.
Great wiring solution for hard to reach or limited space areas. Make properly soldered and waterproof connections in less than 30 seconds.
Wide Applications – Ideal used for vehicle, motorcycle, boat, DIY electrical wirings and other outdoor applications.

Instructions for use:
1.Strip 1/3 inch of wire insulation at both ends. Insert the solder sleeve and twist the strands together.
2.Use a hot air gun to continuously rotate the connector to heat evenly around the solder until it flows into the wiring harness.
3.Then heat at both ends of the pipe until the adhesive flows and seals the wires.
4.It emits heat, wait for it to cool down before use.
Note: It is recommended to use a 1500-2000W heat gun during heating and keep it at a distance of 3-5cm from the welding connector. If the temperature is too high, the wire connector can easily break.

Technical Specifications:
Shrinkage ratio 2:1.
Waterproof Rating: IP67.
Material: Polyolefin Tubing with Solder and hot melt adhesive Inside.
Minimum temperature for solder to melt: 280°F / 138°C
The temperature of the solder completely melted: 320°F / 160°C
Minimum shrink temperature: 176°F / 80°C
Operating temperature :-67°F

Package Dimensions‏:‎3.19 x 3.03 x 2.64 inches; 3.53 Ounces
Item model number‏:‎WR-0
Date First Available‏:‎February 28, 2021
Manufacturer‏:‎HerMia
ASIN‏:‎B08XPFX52Z

【Double-wall Heat Shrink Wire Connectors】- Polyolefin tubing outside and hot melt rings inside. Solder Seal wire connectors provide protection for wires and cables from abrasion, cuts, scratches and low-impact conditions. Comply with SGS and CE standards.
【High Quality Solder Seal Ring】- At high temperatures, the solder ring will melt to generate enough solder to wrap the wire to form a seal. This can enhance the conductivity and ensure a long-term connection.
【Weatherproof】- Hot melt Adhesive can provide enough adhesive to hold the wires tightly. After cooling and hardening, its bonding strength can be reached within a few seconds. It has weatherproof performance and prevents wire corrosion.
【Simple Operation】- No need for crimp tools and soldering machine. Simply put the stripped wire into the solder sleeve and heat it to complete the connection.
【Wide Applications】- Ideal used as marine electrical connectors, automotive, vehicle, motorcycle, boat, household, DIY quick splice wire connectors and other outdoor applications. Package contains-200pcs Red Solder Seal Butt Connectors